One of our trade partners asked us to print and install a 10ft x 40ft exterior barricade at a local mall.  The location for the barricade was in an area that was prone to high winds and weather related issues.  Other barricades at this location used adhesive vinyl or banners which had already started to fall down due to the conditions.  NorthPoint chose to use a solid piece of coroplast instead of the flexible material.  After the barricade was printed we then installed it in vertical pieces utilizing screws into the existing plywood facade.  After all panels were in place we then covered the screws with a color matching piece of small vinyl so the panels looked seamless.